|
| 
Computer-aided techniques like CAD, CAM and FEM require
an efficient coordinate measuring technique in order
to achieve exact correspondence between numerical model
and real component.
Using
the digitizing system ATOS I (Advanced TOpometric Sensor),
an object can be measured in a short time and with high
local resolution. The individual measurements are merged
into a project and the measured data can be exported
as point clouds, sections or STL-data. Additional hardware,
such as mechanical measuring machines, translation units
or robots, is not required.
The ATOS
I is the optimal choice if very short measurement sequences
and a robust data evaluation is needed and compromises
can be accepted in the data quality and data density.
Due to the compact sensor and system, the rugged design
and the modern interface, the system is ready to be
integrated into industrial production processes.
|
|
Applications
Non-contact
and material independent 3d-digitization of arbitrary objects,
such as workpieces, models, moulds, sculptures, human body
parts, component damages etc. for:
- generating
STL data
- transferring
model modifications to CAD
- creating
control data for the manufacturing on NC-milling-machines
and rapid prototyping systems
- nominal/actual
comparison between object and model (CAD model, point clouds
or STL data)
- measurements
with difficult conditions provide authentic measurement
values due to fast measuring time, robust data evaluation
technology and the proven stereo viewing set up
- generation
of measurement data and reports as specified by Quality
Planning for CMMs
- quality
control, e.g. measuring deformations, fabrication defects,
spring-backs
- ready to
be integrated in industrial measuring cell or used as OEM
module in dedicated systems
Features
- Fast measuring
sequence:
Image grabbing in less than one second is supported
- Simple operation:
The user can concentrate on the digitizing progress as all
the transformations are performed automatically by the system.
- Flexibility:
The same sensor (ATOS XL) is capable of measuring small
and large objects (10mm up to 10m).
- High detail
resolution:
Due to the high point density, details of the component
can be depicted precisely. The accuracy of the measured
data is comparable to that of single frame coordinate measuring
machines.
- Mobility:
The system can easily be traveled to the part and can digitize
any object in a flexible manner.
Add ons
 |
Rotation Table
This medium size rotation table is recommended in combination with the ATOS
digitizing systems mounted on a flexible stand, to digitize parts up to 100
kg centered load or up to 40 kg excenter load in an efficient semi-automated
process.
Digitizing and Quality Control of the gathered data can thus easily be automated
using the combined ATOS and rotation table system.
|
|
|
|
